Module to integrate third-party wired detectors and devices into the Ajax security system. It allows you to connect IR barriers, liquid level or gas leak sensors, panic buttons or other devices with contact type (NC/NO) to the system.
Transmitter allows you to connect a third-party detector or device with a wired output to your Ajax security system. The module receives information about alarms and events via a wired connection. After receiving an event, it transmits it to the hub via the Jeweler wireless communication protocol and the hub informs the security company and system users.
Transmitter works with any detector and device with NC/NO contact type. The module supports 8 types of events from connected devices: intrusion, fire, emergency help, panic button, gas, malfunction, flooding and custom. The type of event depends on which alarm code must be sent to the alarm reception center and what is written in the notifications the user receives. This ensures an adequate response to the threat.
Installation and assembly
To add Transmitter to your security system, simply scan the QR code in the Ajax application. You can set the type of connected wired device in Ajax applications for smartphones and PCs. The module is compact and is easy to install in a detector housing or mounting box. The accelerometer integrated in Transmitter warns in case of attempted sabotage.
HUB compatibility: all Ajax HUBs
REX compatibility: all REX Ajax repeaters
Wired device compatibility: any device with NC/NO contact type
Alarm input: 1
Contact status: No, Nc
Supported third-party device type: pulsed, bistable
Tamper input: 1
Tamper input status: No, Nc
Power output for detector or wired device: 3.3Vdc
Settable event types: Intrusion, Fire, Emergency help, Panic button, Gas, Malfunction, Flood, Custom
Power supply: 3 × CR123A 3V lithium batteries (included)
Battery life: up to 5 years
Maximum distance: 1.6Km in free area without interference
Working frequencies: 866.0 – 866.5 MHz, 868.0 – 868.6 MHz , 868.7 – 869.2 MHz, 905.0 – 926.5 MHz, 915.85 – 926.5 MHz, 921.0 – 922.0 MHz
Maximum effective radiated power (ERP): up to 20mW (Automatic power control to reduce power consumption and interference of the noise)
Radio signal modulation: GFSK
Ping interval: 12 to 300 sec
Encryption: All saved and transmitted data is protected by dynamic key block encryption
Skip frequency: to prevent radio interference and radio signal interception
Temperature sensor: yes
Working temperature: From -25°С to +50°С
Max humidity: 75 %
Anti-tamper systems: Anti-counterfeiting protection, Inhibition detection, Accelerometer, Anti-tamper tamper
Dimensions: 100 × 39 × 22 mm